Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

遥感卫星扰振对TDICCD相机图像影响的仿真与分析

随着传输型遥感卫星结构的扩大化及灵活性的增强,对图像品质产生影响的扰振越来越受到重视。当遥感卫星在轨进行成像时,相机的图像品质会由于星上活动部件的运动的影响而下降。文章从调制传递函数（Modulation Transfen Function,MTF）角度出发,对不同工况下太阳翼转动驱动机构（BAPTA）和动量轮对图像品质的影响进行了仿真和评估。同时,针对高分辨率相机成像品质影响,从动力学仿真方面对星体扰振的幅值和频率进行了有限元分析,确定了扰振源的频率和幅值。最后,根据仿真分析结果,提出了星上扰振控制方案建议。     

基于装配约束的飞机导管几何特征建模与误差补偿

针对飞机导管实际装配过程中因装配应力大导致故障频发的问题,提出了一种基于导管装配特征的误差补偿方法.首先采用几何建模法进行了导管装配过程的几何建模,并提出了一种基于轴线矢量的导管装配模型建模方法.在此基础上,采用罗德里格旋转公式建立了基于实际装配工况下的导管空间位姿计算模型.然后基于导管装配要求进行了装配约束分析并识别...     

航天员微重力作业训练系统重力补偿控制策略

针对航天员微重力作业训练系统的重力场补偿控制这一关键技术,进行了理论和实验研究。分析了模拟微重力环境的机理,确定了微重力作业训练系统的总体结构方案,提出了一种基于电流反馈的重力补偿控制及多干扰力补偿控制策略。通过虚拟重力补偿控制实验,验证了在地面环境、动态作业过程中,模拟物体在不同空间重力加速度环境下的运动规律,实现了在重力方向模拟空间环境下物体移动的作业训练效果。研究成果为在地面实现三维作业训练系统的控制奠定了基础。     

基于干扰观测器的高超声速飞行器预测控制器设计简

 针对具有强耦合特性与模型不确定性特点的高超声飞行器控制问题,提出一种新型的姿态预测控制器设计方法。引入参考模型,建立了飞行器姿态预测控制模型。基于此,利用预测理论设计了飞行器的预测控制器,同时设计了干扰观测器实时观测外界未知干扰来进行补偿控制,从而实现滚动优化的目的;基于干扰观测值与真值的误差,利用Lyapunov稳定性理论,确定了控制精度与预测步长大小的关系;最后,在参数标称与拉偏的情形下进行了高超声速飞行器姿态控制系统仿真,仿真结果表明,干扰观测器能快速跟踪干扰,并且所设计的预测步长可以满足飞行器高精度的控制要求。     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

激光陀螺四位置寻北仪提高精度方法

为消除激光陀螺零偏和常值漂移的影响,采用四位置方案来实现高精度寻北。本文简述了单轴激光陀螺四位置寻北方案,给出了陀螺敏感轴与机体系前向偏差角标定方法,研究了寻北仪在倾斜基座下数据补偿算法。本文研究了由于在四个位置上电机转动不到位所引起的误差补偿算法。通过对寻北仪系统测试,采用电机转动不到位补偿后数据标准差降低了0.02º,激光陀螺寻北仪系统达到了高精度快速寻北的要求。     

基于PSO算法的半球谐振陀螺惯导系统陀螺温度补偿方法

针对半球谐振陀螺受温度影响出现零位漂移的问题，以测温电路温度为基准，建立温度频率函数实时解算温度，提出一种基于粒子群优化(PSO)算法的半球谐振陀螺惯导系统陀螺温度补偿方法。在求解温度时，需要先将温度频率函数转换为一元三次方程，存在测试计算量大的问题。引入逆向拟合思想，建立频率温度函数，提高陀螺输出温度实时性和降低测试计算量，替代了传统陀螺测温硬件电路，为惯导系统轻小型设计提供新思路。考虑温度变化、温度变化率以及两者的交叉项，建立温度补偿模型，引入PSO算法求解模型系数。温度试验结果表明，在温箱温度为-40~50 ℃内，补偿后的半球谐振陀螺的零偏稳定性较补偿前提升了46％。     

差动式电涡流传感器在摆式加速度计中的应用

差动电涡流传感器因结构简单、灵敏度高、线性范围大而得到广泛的应用。本文主要论述了差动式电涡流传感器在摆式加速度计中的应用,实验结果表明该设计结构合理、工艺可行,能满足使用要求。